
Half Cell Mono Solar Panel with 166mm Perc Cell JS6-72HPH-(435-455)M
♦Tempered glass: Anti-reflecting coating and high transmission rate glass increasing the power output and mechanical strength of solar module.
♦EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.
♦All frames: Without screws corner connection. 8 holes on the framecan be installed easily.
♦Junction box:Multifunctional and water-proof junction box.
♦Good performance of preventing from atrocious weather such as wind and hails.
♦Resisting moisture and etching effectively, not effected by geology.
♦Certificates issued by international authorities: ISO Quality Management system, CE, TUV ( IEC61215 and IEC61730 )
♦Limited power degradation of Eagle module caused by PID effect is guaranteed under 60℃/85% RH condition for mass production.
♦High salt and ammonia resistance certified by TUV NORD
♦Half Cell Mono Solar Panel with 166mm Perc Cell JS6-72HPH-(435-455)M
♦Solar cell: 6&9 busbar solar cell adopts new technology to improve the efficiency of modules, offers a better aesthetic appearance, which is perfect for rooftop.<br/>
♦Tempered glass: Anti-reflecting coating and high transmission rate glass increasing the power output and mechanical strength of solar module.<br/>
♦EVA and TPT: Using high quality EVA and TPT to prevent destroying and water.<br/>
♦All frames: Without screws corner connection. 8 holes on the framecan be installed easily.<br/>
♦Junction box:Multifunctional and water-proof junction box.<br/>
♦Good performance of preventing from atrocious weather such as wind and hails.<br/>
♦Resisting moisture and etching effectively, not effected by geology.<br/>
♦Certificates issued by international authorities: ISO Quality Management system, CE, TUV ( IEC61215 and IEC61730 )<br/>
♦Limited power degradation of Eagle module caused by PID effect is
guaranteed under 60℃/85% RH condition for mass production.<br/>
♦High salt and ammonia resistance certified by TUV NORD
Electrical Parameters at Standard Test Conditions(STC)
Module type | JS6-72HPH-435M |
JS6-72HPH-440M |
JS6-72HPH-445M |
JS6-72HPH-450M |
JS6-72HPH-455M |
Rated Maximum Power (Pmax/W) | 435 |
440 |
445 |
450 |
455 |
Maximum Power Voltage (Vmp/V) |
40.9 |
41.1 |
41.3 |
41.5 |
41.7 |
Open-circuit Voltage (Voc/V) |
48.7 |
48.9 |
49.1 |
49.3 |
49.5 |
Maximum Power Current (Imp/A) |
10.64 |
10.71 |
10.78 |
10.85 |
10.92 |
Short-circuit Current (Isc/A) |
11.39 |
11.46 |
11.53 |
11.60 |
11.66 |
Module Efficiency (%) |
20.0 |
20.2 | 20.5 | 20.7 | 20.9 |
STC: Irradiance 1000W/M2 Module Temperature: 25℃ AM=1.5 |
Temperature Coefficient
Power Tolerance |
0~+3% |
Temperature Coefficient of Pmax |
(-0.35±0.05)%/℃ |
Temperature Coefficient of Voc |
(-0.27±0.02)%/℃ |
Temperature Coefficient of Isc |
(0.048±0.01)%/℃ |
NOTC(℃) |
(47±2) ℃ |
Operating Conditions
Max. system voltage |
1500DVC (IEC) |
Max. systemfuse rating(A) |
20 |
Operating temperature (℃) |
-40~85 |
Max. static load, front (e.g., snow) pa |
5400 |
Max. static load, back (e.g., wind) pa |
2400 |
Construction Materials
Front Glass |
3.2mm,Low lron tempered Glass |
Frame |
Anodized Aluminum Alloy Type 6063-T5 |
Junction Box |
IP 67 three diodes |
Output Cables |
TUV 1x4mm2, length:600mm |
Connector |
MC4 (IP67) |
Encapsulation Material |
EVA(0.45±0.03mm thickness) |
Back Foil |
White TPT (0.32±0.03mm thickness) |
Fixing Adhesive |
Silicone Sealant(White) |
JINSHI SOLAR
PRODUCTS LIST
PRODUCTS
CONATACT US
Add: No 19. Laoshan Road, Beilun, Ningbo City, P.R.C
FAX: +86-574-26877727
E-mail: admin@jinshisolar.com
Website: www.jinshisolar.com

Copyright © 2019 Ningbo Jinshi Solar Electrical Science & Technology Co., Ltd. All rights reserved. 浙ICP备11033562号 Powered by www.300.cn